Storage server with intel xeon w processor, up to 256 gb ddr4 rdimm/lrdimm ram, 10gbe port, pcle 3.0 x8/x4 slots, up to 20 sata 6gb/s drives, 4u rack mount, 1600 w redundand psu, rohs (51 pages)
Desktop network appliance with intel atom c3000 series processor, ddr4, six/eight gbe ports, two m.2, pcie mini, fanless, rack mount and rohs compliant (89 pages)
Summary of Contents for IEI Technology AVL-2000PLUS
Page 1
AVL-2000PLUS Auto Data Server IEI Technology Corp. MODEL: AVL-2000PLUS Auto Data Server with Intel® Atom™ CPU, Gigabit Ethernet, OBD-II, USB, GPS, Wi-Fi, Bluetooth, Video Capture, Audio, RS-232/422/485, RoHS Compliant User Manual Page 1 Rev. 1.00 – 28 June, 2011...
Page 2
AVL-2000PLUS Auto Data Server Revision Date Version Changes 28 June, 2011 1.00 Initial release Page 2...
Page 3
AVL-2000PLUS Auto Data Server Copyright COPYRIGHT NOTICE The information in this document is subject to change without prior notice in order to improve reliability, design and function and does not represent a commitment on the part of the manufacturer. In no event will the manufacturer be liable for direct, indirect, special, incidental, or consequential damages arising out of the use or inability to use the product or documentation, even if advised of the possibility of such damages.
AVL-2000PLUS Auto Data Server Table of Contents 1 INTRODUCTION......................8 1.1 O ........................9 VERVIEW 1.2 F ........................9 EATURES 1.3 F ......................10 RONT ANEL 1.3.1 LED Indicators....................11 1.4 R ......................11 ANEL 1.5 R ......................12 IGHT ANEL 1.6 L ......................
Page 6
AVL-2000PLUS Auto Data Server List of Figures Figure 1-1: AVL-2000PLUS Auto Data Server ................9 Figure 1-2: Front Panel ......................10 Figure 1-3: LED Indicators ...................... 11 Figure 1-4: Rear View ......................11 Figure 1-5: Right Panel ......................12 Figure 1-6: Left Panel ......................12 Figure 1-7: Dimensions (unit: mm) ..................
Page 7
AVL-2000PLUS Auto Data Server List of Tables Table 1-1: Technical Specifications..................14 Table 2-1: Packing List......................18 Table 2-2: Optional Items ......................18 Table 3-1: Digital I/O Connector Pinouts ................25 Table 3-2: OBD-II Connector Pinouts ..................26 Table 3-3: Remote Control Connector Pinouts ..............28 Table 3-4: COM1 Connector Pinouts ..................
Wireless networking capabilities include Bluetooth 2.0 and 802.11 b/g. 1.2 Features There are four models in the AVL-2000PLUS. Both models feature the following: Fanless system with 1.1GHz Intel® Atom™ Z510 CPU Pre-installed 1 GB 533 MHz DDR2 memory...
AVL-2000PLUS Auto Data Server GPS system Optional UHF RFID reader module Supports OBD-II/FMS/J1939 RoHS compliance 1.3 Front Panel The following are found on the front panel. 1 x VGA connector 1 x Video capture connector 1 x RS-232/422/485 connector (RJ-45)
AVL-2000PLUS Auto Data Server 1.3.1 LED Indicators The LED indicators on the front panel show the status of UHF RFID, Wi-Fi/Bluetooth, RS-422/485, GPRS/HSUPA connection as well as CF card and battery activity. Figure 1-3: LED Indicators 1.4 Rear Panel The rear panel has VESA mounting screw holes for DIN rail mounting.
AVL-2000PLUS Auto Data Server 1.5 Right Panel The right panel has one remote control connector, one digital I/O connector and one 12 V DC power connector. The ACC/DC power switch is also located on the right panel. Figure 1-5: Right Panel 1.6 Left Panel...
AVL-2000PLUS Auto Data Server 1.7 System Specifications The technical specifications for the AVL-2000PLUS systems are listed in Table 1-1. System 1.1 GHz Intel® Atom™ Z510 Chipset Intel® US15WP Memory One 1.0 GB 533 MHz DDR2 pre-installed Windows 7 Embedded Storage 1 x 4 GB CompactFlash®...
AVL-2000PLUS Auto Data Server Connectors and Buttons Antenna Connectors 1 x GPS antenna connector 1 x 2.5G/3G/3.5G antenna connector 1 x Wi-Fi/Bluetooth antenna connector 4 x UHF RFID antenna connectors I/O Ports and Switches 1 x Power connector 1 x VGA connector...
AVL-2000PLUS Auto Data Server Chapter Unpacking Page 16...
Page 17
AVL-2000PLUS Auto Data Server To unpack the AVL-2000PLUS, follow the steps below: Step 1: Use box cutters, a knife or a sharp pair of scissors that seals the top side of the external (second) box. Step 2: Open the external (second) box.
AVL-2000PLUS Auto Data Server Quantity Item Image GPS/GSM antenna (P/N: 32506-000100-100-RS) Wi-Fi/Bluetooth antenna (P/N: 32505-000400-100-RS) OBD-II cable (P/N: 32025-000300-100-RS) J1939/FMS cable (P/N: 32025-000400-100-RS) User manual CD and driver CD Table 2-1: Packing List Item Image UHF RFID antenna with cable...
Page 19
AVL-2000PLUS Auto Data Server If any of these items are missing or damaged, contact the distributor or sales representative immediately. Page 19...
AVL-2000PLUS and severe injury to the user. Electrostatic discharge (ESD) can cause serious damage to electronic components, including the AVL-2000PLUS. Dry climates are especially susceptible to ESD. It is therefore critical that whenever the AVL-2000PLUS is accessed internally, or any other...
AVL-2000PLUS Auto Data Server Anti-static Discharge: If a user open the bottom panel of the AVL-2000PLUS, to configure the jumpers or plug in added peripheral devices, ground themselves first and wear and anti-static wristband. 3.3 Installation and Configuration Steps The following installation steps must be followed.
3.5 Mounting the System To mount the system onto a VESA bracket, please follow the steps below. Step 1: Attach theVESA mounting bracket to the bottom panel of the AVL-2000PLUS. Secure the bracket to the AVL-2000PLUS with the supplied retention screws Figure 3-3).
AVL-2000PLUS Auto Data Server 3.6 I/O Interface Connectors This section provides an overview of the I/O interface connectors of the AVL-2000PLUS. 3.6.1 CAN Bus Connection There is one 3-pin CAN Bus connector. The connector pinouts are shown in Figure 3-4: CAN Bus Connector Pinouts 3.6.2 Digital I/O Connection...
To connect a LAN cable with an RJ-45 connector, please follow the instructions below. Step 1: Locate the RJ-45 connectors on the bottom panel of the AVL-2000PLUS. Step 2: Align the connectors. Align the RJ-45 connector on the LAN cable with one of the RJ-45 connectors on the bottom panel of the AVL-2000PLUS.
AVL-2000PLUS Auto Data Server 3.6.4 OBD-II Connector The AVL-2000PLUS has one DB-9 male connector for OBD-II connection. Use the OBD-II cable or J1939/FMS cable (Figure 3-7) in the package to connect the AVL-2000PLUS. OBD-II Cable J1939/FMS Cable Figure 3-7: OBD-II Cable and J1939/FMS Cable The pinouts for OBD-II connector are listed in the table below.
The pinout locations of OBD-II cable connector and J1939/FMS cable connector are shown below. Figure 3-9: OBD-II Connector Pinouts Figure 3-10: J1939/FMS Connector Pinouts 3.6.5 Power Input Connection The AVL-2000PLUS has one 12 V DC input connector on the right panel. Figure 3-11: Power Input Connector Page 27...
3.6.7 Serial Device Connection The AVL-2000PLUS has one male RJ-45 connector on the bottom panel for serial devices to be connected. Follow the steps below to connect a serial device to the AVL-2000PLUS. Step 1: Locate the RJ-45 connector. The location of the RJ-45 serial port connector is shown in Chapter 1.
AVL-2000PLUS Auto Data Server Step 3: Insert the serial connector. Insert the DB-9 connector of a serial device into the DB-9 connector on the cable. See Figure 3-13. Figure 3-13: Serial Device Connector Step 4: Secure the connector. Secure the serial device connector to the external interface by tightening the two retention screws on either side of the connector.
Step 0: 3.6.9 Video Capture Connection The AVL-2000PLUS has one DB-9 female connector for video capture connection. Use the video cable (Figure 3-7) in the package to connect the AVL-2000PLUS with the device. Page 30...
Table 3-5: Video Connector Pinouts 3.6.10 VGA Monitor Connection The AVL-2000PLUS has a single female DB-15 connector on the external peripheral interface panel. The DB-15 connector is connected to a CRT or VGA monitor. To connect a monitor to the AVL-2000PLUS, please follow the instructions below.
Step 0: 3.7 System Maintenance If the components of the AVL-2000PLUS fail, they must be replaced. Please contact the system reseller or vendor to purchase the replacement parts. Page 32...
Page 33
AVL-2000PLUS Auto Data Server NOTE: A user cannot replace a motherboard. If the motherboard fails it must be shipped back to IEI to be replaced. Please contact the system vendor, reseller or an IEI sales person directly. Federal Communication Commission Interference Statement This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules.
Page 34
AVL-2000PLUS Auto Data Server Radiation Exposure Statement: This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body. Page 34...