Table of Contents
Advertisement
note
Because of the different
technologies used, your
projected image may not
exactly match the colors on
your notebook or computer
monitor.
Solving Problems
90
3. Adjust the
Sync
The image is too light or dark, or colors are incorrect.
■
Press the
Color Mode
option in the Image menu. See page 43 for details on the available
options.
If you're displaying video, adjust the
■
settings on the Image menu. You can also try
Color Mode
adjusting the
Color Saturation
on the Image menu.
■
Try adjusting the
Brightness
menu.
Try adjusting the
■
Brightness Control
■
Check your computer display settings to correct the color balance.
The projector's lamp may need to be replaced. See page 74 for
■
instructions.
Make sure the correct input signal is selected in the Signal menu
■
(see page 60).
■
Make sure that all cables are connected to the proper ports and
connected securely.
There is no sound, or the sound is not loud enough.
Use the
buttons to adjust the volume (see page 48), or
■
Volume
adjust the
Volume
Make sure A/V Mute is not enabled. (Press the
■
to disable it.)
setting to increase the image sharpness.
button or select a different
Color Adjustment
,
Color Temp
and
Contrast
setting (see page 61).
setting in the Settings menu.
Color Mode
and
, and
settings
Tint
settings on the Image
button
A/V Mute
Advertisement
Table of Contents
