2. Connect the USB drive or the flat end of the USB cable to the
USB
TypeA
3. Connect the other end of the cable to your camera or other
device, if necessary.
The indicator light turns orange and then green when a USB
device is connected.
4. If you are not connected to another image source, the Slideshow
program appears.
If you are connected to another image source, press the
button on the remote control to start the Slideshow
Slideshow
program.
See page 50 for instructions on controlling the slideshow.
5. When you're finished, press
Slideshow before turning off or removing the USB device.
Be sure to turn off your USB device (if necessary) before you remove
the device or cable from the projector.
port on the projector, as shown.
and select
Esc
Indicator
light
to exit the
Exit
Setting Up the Projector
33