If you're using Mac OS X:
1. Open
System Preferences
2. Click
or
Display
Displays
3. Select
VGA Display
4. Click
Arrangement
5. Select
Mirror Displays
The message
Not Supported
■
Make sure the correct input signal is selected in the Signal menu
(see page 59).
Make sure your computer's resolution and frequency or refresh
■
rate is supported by the projector (see page 98). If necessary,
change your computer's settings.
Only part of the computer image is displayed.
Press the
button on the remote control or the
■
Auto
on the projector.
Make sure the image
■
menu. See page 60 for more information.
Press the
button on the remote control or select the
■
Aspect
correct
setting from the Signal menu. See page 44 for
Aspect
details on the available options.
■
Press the
button on the remote control to cancel the E-Zoom
Esc
function.
■
Make sure your computer's resolution setting is correct. See the
compatible video formats listed on page 98.
■
You also may need to modify existing presentation files if you
created them for a different resolution. See your software
documentation for specific information.
If you're projecting a widescreen computer image, adjust the
■
setting (see page 59), if necessary.
Resolution
.
.
or
.
Color LCD
or
.
Arrange
.
is displayed.
setting is correct in the Signal
Position
button
Enter
Solving Problems
87