Table of Contents
Advertisement
Setting Up the Projector
18
Unpacking the Projector
After unpacking the projector, make sure you have all these parts:
Projector
Power cord
Save all packaging in case you need to ship the projector. Always use
the original packaging (or the equivalent) when you need to send the
projector to another location; see page 79 for instructions.
Additional Components
Depending on how you plan to use the projector, you may need
additional components:
■
To receive an HDMI signal from your video device, you'll need
an HDMI cable. One may be provided with your video
equipment.
To receive a component video signal from a DVD player or other
■
video device, you'll need a component video cable (one may be
provided with your video equipment) and the
component-to-VGA video adapter that came with the projector.
■
To receive an S-Video signal, you'll need an S-Video cable. One
may be included with your video equipment, or you can purchase
one from Epson. See "Optional Accessories" on page 15.
To receive an audio signal, you'll need an RCA-type audio cable
■
with two male plugs, or a stereo mini-jack audio adapter cable
(not necessary with HDMI connection).
PDF manual and
registration CD-ROM
Component-to-VGA
video adapter
Remote control
and batteries
Advertisement
Table of Contents
