Panasonic KX-TGM422AZ Operating Instructions Manual page 54

Answering System
Important:
R A new message alert is stopped 1 minute
after the unit starts to call. The unit will not
retry the call even if the call is not answered.
Storing a phone number to which
the unit makes an alert call
n From the phonebook:
1
MMENUN#338
2
MbN: "Notification to" a
MSELECTN a MADDN
3
MbN: "Phonebook" a MSELECTN
4
MbN: Select the desired phonebook
entry. a MSAVEN a MOFFN
n By entering a phone number:
1
MMENUN#338
2
MbN: "Notification to" a
MSELECTN a MADDN
3
MbN: "Manual" a MSELECTN
4
Enter the desired name (16 characters
max.). a MOKN
5
Enter the desired number (24 digits
max.). a MOKN a MSELECTN a
MOFFN
Turning on/off the new message
alert setting
1
MMENUN#338
2
MbN: "On/Off" a MSELECTN
3
MbN: Select the desired setting. a
MSAVEN a MOFFN
Editing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MSELECTN
3
MMENUN a MbN: "Edit" a MSELECTN
4
Edit the name if necessary (16 characters
max.). a MOKN
5
Edit the phone number if necessary (24
digits max.). a MOKN a MSELECTN a
MOFFN
54
Erasing the set phone number
1
MMENUN#338
2
MbN: "Notification to" a MSELECTN
3
MMENUN a MbN: "Erase" a MSELECTN
4
MbN: "Yes" a MSELECTN a MOFFN
R The new message alert setting is
turned off.
Activating/inactivating the
remote access code to play
messages
If you activate this feature, you must enter the
remote access code (page 55) to play the
new message from the new message alert
call. This is so that unauthorised parties
cannot listen to your messages. The default
setting is "Inactivate".
– "Inactivate": You can listen to the
message by pressing 4 to play new
messages (without entering the remote
access code).
– "Activate": You must enter your remote
access code and then press 4 to play new
message.
1
MMENUN#338
2
MbN: "Remote code" a MSELECTN
3
MbN: Select the desired setting. a
MSAVEN a MOFFN
Listening to messages
After you answer the new message alert, you
can listen to the messages as follows.
n When the remote access code is set to
"Inactivate":
Press 4 to play the new message during
the announcement.
n When the remote access code is set to
"Activate":
1
Enter the remote access code
(page 55) during the announcement.
2
Press 4 to play the new message.
Note:
R Within 10 seconds after listening to new
messages, you can press #9 during the