Hardware Manual VDH-NK350A A. CAUTION To our dear customers! Thank you for using our products. If you encounter any problems when using, please do not hesitate to contact our resellers. We will provide excellent services to you via our resellers.
Hardware Manual VDH-NK350A B. Introduction Product Overview This equipment is an excellent digital surveillance product designed specifically for the security use. Using embedded LINUX operating system, it makes the system more stable. Using standard H.264 video compression and G.711A audio compression technology achieves audio and video functions such as high-quality, low bit rate and single-frame playback.
Hardware Manual VDH-NK350A C. Unpacking Accessories ★ Power cable and adaptor AC100-240V/DC12V 4.16A x 1PCS ★ HDD screws x 4pcs ★ Operation CD x 1pcs ★ Mouse x 1pcs Unpacking When you receive the product, check first whether the packing of the equipment has obvious damage.
Hardware Manual VDH-NK350A E. Product appearance Front Panel Power Power Indicator Indicator Network Network on Indicator Recording Recording Indicator Indicator Rear Panel DC12 Power Input USB 2.0 Mouse Port USB 3.0 Mouse Port HD digital output Audio Output LAN Port...
Hardware Manual VDH-NK350A Installation Illustration Video input Input interface is RJ-45 type; input signal is IP CAM The Video signal should comply with national standards, a higher signal to noise ratio, low distortion, low-interference; clear images, no deformation, nature color and appropriate brightness.
Hardware Manual VDH-NK350A Cables and shielded cable should be well-connected firmly to avoid false, joint welding or oxidation. Connections for video outputs The video outputs include VGA and HDMI interfaces. Pay attention to the following when you select a PC display instead of a monitor.
Hardware Manual VDH-NK350A F. Q & A and Maintenance 1. Q & A Q 1. After power on, NVR doesn’t work. A: The possible causes: 1. Wrong power input 2. bad connection of power cable 3. Power error 4. Firmware update error 5.
Page 10
Hardware Manual VDH-NK350A Q 6. No recorded file in local side A : The possible causes: 1. Wrong data cable or jumper error in the hard disk 2. Hard Disk error 3. Upgraded firmware cannot recognize the existing file system 4.
Page 11
Hardware Manual VDH-NK350A 1. Operating system is Win98 or Win Me and the client software cannot be installed or displayed normally; Upgrade the operating system to Win2000sp4 or above, or use lower versions of the client software. 2. ActiveX control blocked; install the ActiveX control in the attached CD.
Hardware Manual VDH-NK350A 4. Wrong firmware problem; Upgrade firmware to fix it. Q 18. Alarms do not work A : The possible causes: 1. Wrong alarm setting 2. Wrong alarm wiring 3. Wrong AlarmIn signal 4. One alarm equipment involves into two loops.
Page 13
Hardware Manual VDH-NK350A Do not remove audio/video cables when the NVR is powered on, or they will be damaged. Do not use the TV interface in the NVR video output (VOUT), or the NVR output circuit will be damaged easily.
Hardware Manual VDH-NK350A G. Appendix : Specifications 16CH NVR System Operating system:Linux Storage Build in SATA interface x 2, compatible SATA/SATAII/SATA III HDD( Max. 8TB) Device/Interface E-SATA *1 (Max 16T) Optional Video And Other Dual video:HD OUT/VGA USB 2.0 *2 I/O Interface USB 3.0 *1...
Page 15
Manufacturer : FUHO TECHOLOGY CO., LTD. No. 30 Lane 726 Sec. 3 Jinma Rd., Changhua City Phone: 886-4-751-2881 Fax: 886-4-751-6631...
Need help?
Do you have a question about the VDH-NK350A and is the answer not in the manual?
Questions and answers