Vacron SA-650HD-3GA Quick Manual

«For more detailed information, please check the manual
Playback
in CD for reference.
1. Playback on DVR site
(Use remote controller)
Click on remote controller, to enter record list, using
to select footage , click again to enter playback screen.
Playback menu Playback screen
Select Decode Items
Start Record Time End Record Time
2011/06/30 16:00:46 2011/06/30 17:05:13
2011/06/30 17:05:13 2011/06/30 18:09:41
2011/06/30 18:09:42 2011/06/30 19:14:05
2011/06/30 19:14:06 2011/06/30 20:18:30
2011/06/30 20:18:30 2011/06/30 21:22:53
2011/06/30 21:22:54 2011/06/30 22:27:14
Page 00001 Total Pages 00003
2. 3G client software for viewing directly
Executive "3G ClientApp.exe software and login (bus/123456) ,
the software interface shown as below.
Note: To perform this software will require DirectX 9.0 or more.
3G client software
Add the vehicle information
Choose split screen
Login
Preview
Google Map and inquiry the date
and time record of the vehicle.
Vehicle name
Camera Channel
Real-time image
Vehicle information
Google Map
3. Through Carbox Player on PC site
(Use HDD to playback directly)
Execute the CarBox2.exe from CD-ROM , the display as showing
below.
Note: Caution: It needs to install DirectX 9.0 or above
before running CarBox2 software.
Viewer interface schematic
Position
Latitude &
Longitude
G Sensor
Speed
Video Searching BAR
Play Speed
Volume
Control Interface
Description
Hard Disk Backup
Configuration
Setting
G-sensor: Detect & record G-force data.
Snapshot
Google Map X: Induct about level of vehicles moving
Y: Induct around level of vehicles moving
Open Folder
Z: Induct Height fluctuation around level of
★ GPS Coordinate, Speed and Google Map
(select models with 3G modules)
5
HDD Format / Restore
Q: Two ways to format the HDD, format and restore.
When should you「format」or「restore」the HDD?
Ans:
1.「Format」HDD: When you use the HDD for the very first time or a
brand new HDD, you should format it in order to use it correctly.
2.「Restore」HDD: When you have backup the recorded files into PC and
want to use the HDD for other purposes, you have to restore it first
so it can be used correctly.
Please follow the steps below:
1. Plug the
2. Execute the player CarBox2.exe
(Select models with 3G modules)
3.Click
The event log and
vehicle driving records.
ê
For more detailed information, please check the
manual in CD for reference.
Recording Set Up
1. On Screen Set up
2. Through CarBox2 Player in case without Monitor
A:Remove the HDD and plug it to PC
B:Launch the software enter setup page
Before start recording, please configure the setting well and then
into the host. The configuration interface of its options detailed instructions,
vehicles moving
please see the operation manual of CD-ROM.
HDD into PC directly or through USB converter.
into main page.
icon to into the screen as below.
Select the location
of HDD
format
restore
show below:
6
Vehicle
4-CH DVR System

Quick Guide

TYPE B: 3G Module
4CH
120/100fps
NTSC/PAL Audio
H.264
Feature
1. Provide Video output for playing-back mode in mainframe.
2. Recording format: D1 and CIF
3. Support 1CH Audio Input.
4. User friendly player software, easy to operation.
5. Overall quick search event log.
6. The full recording time and date can be showing in the monitor directly.
7. Wide range voltage design.
8. Auto recording after power supplied.
9. Removable HDD Track compatible with 2.5" HDD or SSD.
10. Provide 4 sets of alarm input ports, built-in buzzer.
11. Firmware can be upgraded via USB port.
12. Support recording audio, video, G-sensor and GPS data at the same time.
13. Optional 3G module, for real time monitoring the driving statue, or talk
to driver
Power On( Turn off ) / Record(
★Power on / Record
Turn on the power, and it will take approximately 40 seconds to
boot up. During the recorder booting up, the HDD indicator LED will
start flashing as the recording is in progress.
1. Red light: light on, means power on; light off, means no
power/power off.
2. Green light: light flashing, means HDD take recording; light off
means non-recording.
★Power off/Stop recording
Power off also stop recording, at then you can take out HDD to
read the recorded files.
Accessories
plug HDD
.Standard: Main Machine, Remote Control, 3 Pin Power Cable,
1
Harness Plug for Video Input , Alarm Cable, Driver CD,
Quick Guide
2.Optional: 3G Module, G-Mouse
H12A650H01
TYPE A: Without 3G Module
2011 DEC V1.0
3
3D
G
-20~+65℃
2.5"
SATA HDD
(inside vehicle)
HDD G-Sensor
ALARM GPS
3G Module
TYPE B optional
Stop record )