Table of Contents
Advertisement
To enable motion detection, follow the steps below:
1 Enable Motion detection
2
Sensitivity---- It supports five modes: Lowest, Lower, Low, Medium and High. The higher the sensitivity, the
camera will be more easily alarmed. Select one motion sensitivity.
3 Trigger
interval--- The interval time between two motion detections. Here supports
5s/6s/7s/8s/9s/10s/11s/12s/13s/14s/15s. Select one interval time.
4 Select the alarm indicators
When the motion has been detected, the alarm status will turn to Detect alarm.
There are four alarm indicators:
A PC Sound
If you select PC Sound, when the motion has been detected, the people around the PC will hear beep alarm
sound.
B Send E-mail
If you want to receive alarm emails when motion is detected, you must select Send E-mail and set Mail
Figure 4.30
Figure 4.31
47
Advertisement
Table of Contents
