Related Manuals for SOUNDMASTER PL900
Summary of Contents for SOUNDMASTER PL900
- Page 1 DEUTSCH FRANÇAIS ENGLISH NEDERLANDS Hersteller Wörlein GmbH Tel.: +49 9103/71670 Gewerbestrasse 12 Fax.: +49 9103/716712 D 90556 Cadolzburg Email. info@woerlein.com GERMANY Web: www.woerlein.com PL900...
-
Page 3: Battery Installation
BATTERY INSTALLATION The battery compartment is located on the back of the remote control. Remove the battery compartment door by pressing in on the tab and lifting it off. Insert two (2) AAA size batteries (not included) into the battery compartment following the polarity markings inside the battery compartment. - Page 4 Installation of counter weight Slide in the counter weight completely into the rear of the tone arm until it reach the end, turn it clockwise until it click with pit inside. Twist the counter weight clockwise & backward until it reach the white line as figure 2 Twist the counter marking until it reach “...
- Page 5 Playing compact disc Getting start Press the Function button (5/45) to select “ CD “ mode. The LCD display will show “ busy “ and then “ no disc “ if the CD compartment is empty. Then press the CD tray open button (6) to open the CD tray (7). Place a CD with the printed side facing up inside the tray &...
-
Page 6: Recording Function
Recording function Apart from the CD playback function, it can perform the CD recording function either from Phono / Tape / Aux and USB mode respectively. All the recording track will be stored at “ audio-CD “ format:- Before start, place a CD-R or CD-RW disc in the CD tray (7). The disc is able to record only if the LD display show “ NO TOC “. -
Page 7: Auto Mode
A) Auto mode Press the “ Auto/Manual “ button (43) when prepare the recording function, the LCD (3) will show -20db , -30db, -40db, the “AUTO TRACK” icon will appear on LCD“ When the recording sound level has dropped below the -20 / -30 / -40 dB (record signal) respectively, the current track will terminate and then generate a new track &... -
Page 8: Usb Programming
Playback of MP3 song via USB storage media Connecting The system is able to decode and playback all MP3 file which stored in the memory media with USB connecting port (21). Set the system at standby mode first or other function except USB mode. Plug-in the USB pen-drive with the face up &... -
Page 9: Phono Operation
Press “ stop “ button (44) at USB stop mode to cancel all programmed memory. Press the “ folder / pre-up “ button (44) to select the 1 track of next folder directly and hence to speed up the song selection. -
Page 10: Line Out Connection
Adjustments Anti-skating control The anti-skating control (28) is made the stylus more stable and this relative to the different type of vinyl, thus, just set it to the comfortable position as you desired. Tone arm stopping position alignment The position of the tone arm complete playback and return to the rest station can be adjusted at the alignment screw (26) as follow:- Before starting the alignment, please take out the hole covering rubber:- A) If the system cannot complete the playback of record and return earlier...
Need help?
Do you have a question about the PL900 and is the answer not in the manual?
Questions and answers