Installation
Local storage
Caution
Local storage on SD cards should only be used for alarm
recording. To minimize the risk of losing information, use
multiple, redundant recording systems and a procedure to
back up all digital information.
Inserting an SD card
1
Push a small object (for example, the 1.5 Allen key)
into the opening above the access flap to open it (push
straight, do not wobble).
2
Slide the memory card into the slot until it latches into
place.
3
Turn the locking screw counterclockwise to lock the
card into place.
Push
SD card
1.5 mm
Ceiling mount
Mount flush to ceiling
To flush mount the camera in a ceiling:
1
Use the mounting ring to mark out the recess hole and
to mark the four mounting holes.
The mounting holes PCD is 133 mm (5 1/4 in).
2
Cut out the inner recess hole: Ø105 mm (4 1/4 in).
3
Drill four holes with a diameter of 6 mm (1/4 in).
4
Insert the supplied mounting plugs (6 × 30) into the
holes.
5
Use the supplied screws (4.5 × 40) to securely attach
the mounting ring to the ceiling surface:
×4
∅6 mm
×4
4.5 × 40
Note
If using a recessed 4s mounting box, attach the mounting
ring using two screws and the supplied washers (M4 × 14).
5
∅105 (4 1/4)
133 (5 1/4)
4s box
121 (4 7/8)
×2
M4 × 14