Table of Contents
Advertisement
Installation Instructions
(1) Remove the cap from the lens mount.
(2) Select the C mount lens (with mount ring) or CS mount lens.
(3) Screw and fasten the lens into the lens mount.
(4) Connect the video output wire between monitor and camera through
75ohm type coaxial cable.
(5) Connect the power cord input.
(6) When monitor shows the picture, please adjust the focus and iris of the
Lens to obtain the best image according to the following procedures:
Choose the objects at a distance about 5 ~ 10 meter away.
Loosen the mount lens fixing screw (use L wrench), if necessary.
Turn the lens and the mount together until image is clear.
Screw the mount to camera.
(7) Fix camera to the bracket, if necessary.
Rear Panel Switches
AC90~260V
AC24V
DC12V/AC24V
(DC12V, optional AC type)
3
4
Advertisement
Table of Contents
