Table of Contents
Advertisement
Installation
Warning
• Do not leave the lens facing the sun.
The sunlight will focus inside the camera and might
cause a fire.
• When installing the camera, make sure there is space
between the camera and the surface, such as the ceiling,
etc., where the camera is installed. If there is no space
between the camera and the surface, the temperature
inside gets high and may lead to failure or accident.
• Make sure to attach the supplied wire rope to prevent
accidents due to falling.
• Attach the lens in the exact way described in this
document. Loose attachment may lead to injury due to
the lens falling off.
• Check that the attachment is not loose at least once a
year. Perform more frequent checks depending on the
usage.
• Full performance may not be achieved depending on the
installed circumstance or lens. Please contact Sony for
details.
Mounting the lens
Mounting/removing of the lens should be performed after
turning the camera "OFF".
1
Remove the body cap from the camera and the lens
rear cap from the lens.
• Perform this operation in a non-dusty place in a
quick manner to prevent dust from getting into the
camera.
• Remove the lens front cap on the front side of the
lens when you shoot.
Lens front cap
Lens rear cap
Body cap
2
Align the white dots on the lens and camera, then
attach.
• Face the mount downward, to prevent dust from
getting in.
3
Push the lens against the camera lightly then rotate it
in the direction of the arrow until it clicks.
• Do not insert the lens at a tilted angle.
Notes
• When you mount the lens, do not press the Lens release
button.
• Do not apply excessive force on the lens.
• Securely hold both the camera and lens when you carry
the camera with lens mounted.
• Do not hold the camera by holding the lens part when it
is protruding when zooming or focusing.
• Zoom lens use
Zoom position may be changed depending on the
installation circumstances.
Make sure to fix it by applying tape on the zoom ring.
Recommended tape: 3M Scotch
Model No. 471 BLA 50 equivalents
Apply tape on the zoom ring full circle to fix.
7
®
plastic film tape
Zoom ring
Tape
Advertisement
Table of Contents
