Mounting (Tower) - Tripp Lite SmartPro SMART3000RMOD2U Owner's Manual

Mounting
( continued )

Mounting (Tower)

Mount the UPS System in a vertical or tower position using 2-9USTAND base stands (sold separately). The user must determine the fitness of hardware
and procedures before mounting.
WARNING! The UPS system is extremely heavy. Use caution when lifting and mounting. User must properly stabilize the UPS when lifting
and mounting.
1
Adjust each stand to a width of 3.50 inches (89 mm) to match the UPS.
Align the stands approximately 10 inches (254 mm) apart.
2
Have one or more assistants help you place the UPS on its side in the stands.
Place the UPS so that its control panel is on top and facing outward.
3
Rotate the control panel for easy viewing while the UPS is mounted in tower
position. Gently pull the panel out; rotate it; Gently push the panel back into
place.
1
2
3
6
3.50 in. (89 mm)