Mounting (Tower) - Tripp Lite SmartPro SMART2200RM2U Owner's Manual

2u rack-mount, intelligent, line-interactive ups systems

Hide thumbs Also See for SmartPro SMART2200RM2U:

Table of Contents

Available languages

Mounting (Rack)

2-Post Mounting

2-post mounting requires a Tripp Lite 2-Post Rack-Mount Installation Kit (model: 2POSTRMKITWM,

sold separately).

Mounting (Tower)

Warning: When mounting the UPS system in a tower orientation, make sure the LCD panel

is at the top of the UPS, not at the bottom.

Note: To mount the UPS in an upright (tower) position, 2-9USTAND is required (sold separately).

Rotate the LCD Screen panel for easy viewing

while the UPS is tower mounted. Insert a small

screwdriver, or other tool, in the slots on either

side of the panel. Pop the panel out, rotate it

and pop the panel back in place.

Table of Contents

Show Quick Links

Table of Contents