Toto WASHLET TCF4914E Series Instruction Manual page 66

Troubleshooting
Trouble
The deodorizer
seems to be not
working
A strange odor is
emitted
The auto power
deodorizer feature
is not working
Trouble
The soft light, bowl light
and CLEAN indicator
do not light up
Pre-mist and
after-mist do not
work
The pre-mist sprays
out spontaneously
66
Deodorizer
Is "Deodorizer" set to "OFF"?
Set to "ON".
Even after sitting down, you do not hear operation sounds.
Sit back on the toilet seat.
If you hear an operation sound from the deodorizer, but odours are not
removed.
Clean the deodorizing filter.
Are you using an air freshener or deodorizer that you purchased separately?
Doing so may reduce the effectiveness of the product's deodorizer or cause
strange odors.
Remove the air freshener or deodorizer.
Is "Auto power deodorizer" set to "OFF"?
It starts about 10 seconds after you stand up from the toilet seat.
Sanitary
Is the "Soft light", "Bowl light" and "CLEAN indicator" setting "OFF"?
Set to "ON".
If the "CLEAN indicator" LED is not lit, it is time to replace the component that
generates "ewater+". (Replacement will be charged) Consult the installer,
seller, or TOTO customer service (see contact information on the back cover).
Is "Auto bowl CLEAN" set to "OFF"?
Set to "ON".
The following functions do not work when the toilet seat is open.
Is "Seat/lid" of "Auto open/close" set to [Seat•lid]?
You can change it to "Lid".
The pre-mist does not work for about 90 seconds after the after-mist has
 nished.
{For TCF4911E *** , TCF4911 *** }
Because the body sensor can detect movement through the wall or door in
front of the toilet, the "Auto bowl CLEAN" function may cause the toilet to pre-
mist even when you are outside of the bathroom.
You can switch "Auto bowl CLEAN" to OFF.
{For TCF4914E *** , TCF4914 *** }
When body sensor A detects someone, the pre-mist is sprayed.
If the cleansing functions (e.g., Rear cleansing and Front cleansing) are not
used for about 8 hours, "Auto bowl CLEAN" starts and mist is sprayed inside
the bowl unit.
Please check
Set to "ON".
Please check
Ref.
Page
46
-
31
-
46
-
Ref.
Page
48
-
44
42
-
44
-
21