Toto WASHLET TCF4914E Series Instruction Manual page 33

{TCF4911 *** , TCF4914 *** }
Gap between the Main Unit and Bowl Unit
You can remove the main unit to clean
the top of the bowl unit and the bottom of
the main unit.
1
Switch the breaker on the
distribution board to OFF.
2
Remove the main unit.
Do not pull the unit with undue force
(because the water supply hose and
power cord are attached).
3
Clean the top of the bowl unit and the bottom of the main unit.
Wipe with a soft cloth soaked in a diluted, neutral kitchen detergent. Then, wipe it with a soft cloth soaked
in water so that no detergent remains.
4
Mount the main unit.
Be careful not to pinch the cords between the main unit and the base plate.
Push the main unit  rmly on to the
base plate until a click sound is heard.
(Failure to do so could cause the main unit
to come loose and fall resulting in injury.)
After mounting, check that the main unit
does not detach even when pulled.
5
Switch the breaker on the distribution board to ON.
The "Power" LED lights up.
Soft cloth soaked in water
If the breaker on the distribution board is not turned off, the
unit may malfunction or cause a failure or electric shock.
Pull the main unit toward you while
pressing the "Main unit removal button".
CAUTION
(Approximately once a month)
Toilet paper, etc. (May cause damage.)
Base plate
Top of the bowl unit
Bolt
Base plate
Main unit
removal button
Click
Align the main unit
with the center of
the base plate and
press it  rmly onto
the base plate until
a click sound is
heard.
33