10-channel universal voltage input & current input, thermocouple input module (8 pages)
Summary of Contents for ICP DAS USA M-7051
Page 1
1. Introduction The M-7051 device is a data acquisition and control modules that support Modbus RTU. They can be remotely controlled using a set of commands called DCON protocol. With the Modbus RTU protocol, it can easily communicate with most popular SCADA/ HMI software and PLCs.
Default settings for the M-7051 module is: 。Protocol: Modbus RTU 。 Module Address: 01 。 DIO Type: Type 40 M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...
Page 3
It can select multi-options such as Baud Rate, Protocol, Checksum, and Format to search module. The default settings for the module can be found in Section 3. Click OK after selecting the COM port setting. M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 4
5. DCON utility pro will search for the selected COM port according the setting previously set. DCON Utility Pro supports DCON and Modbus protocol for all ICPDAS and the others modules. M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 5
For M-7000 modules using the Modbus RTU protocol, use Function 04h to read the data from the input channels. See user manual Section 3.2 for details. M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 6
If user doesn’t know command, user can select Address and ID, it will show some refer commands as below. User can select necessary command to test or debug modules. M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com...
Page 7
M-7051 16 Channel DI DAQ Module - QuickStart (Oct/2019) ICP DAS USA, Inc. | www.icpdas-usa.com | 1-310-517-9888 | 24309 Narbonne Ave. Suite 200. Lomita, CA 90717...