Advertisement
Turning power ON/OFF
◆ Turning power ON
1
Press and hold X (approx. 2 sec.) until the
illumination lights green
The lock screen appears following the startup screen.
2
Slide the key on the lock screen right
･
Lock screen→P35
■ Turning power ON for the first time
Tap [OK] on the confirmation screen for software update
function, then make initial setting and select application
set as Home screen.
･
The setting can be changed later.→P33
◆ Turning power OFF
1
Press and hold X until the phone options
menu appears→[Power off]→[OK]
After vibrating once, the terminal turns off.
Basic operation (Using touch
panel)
The display of the terminal is a touch panel which you can
operate by directly touching with your finger or the
included touch pen. A motion sensor detects the
orientation and movement of the terminal so that the
screen switches depending on if the terminal is held
vertically or horizontally.
◆ Notes for using the touch panel
The touch panel is designed for being touched lightly with
fingers or the touch pen. Do not push it forcibly with the
finger or touch pen, or press it with sharp objects (nail,
ballpoint pen, pin, etc.).
･
Touching the touch panel may not work in the following
cases. Note that it may cause malfunction.
- Operation with gloved hands
- Operation with tip of fingernail
- Operation with a foreign object on the display
- Operation with protective sheet or seal on the display
- Operation with the touch panel wet
- Operation with finger wet by sweat or water
31
Before using the terminal
Advertisement
