Advertisement
✔INFORMATION
･
You can put only the battery pack on the wireless charger
to charge. Put the battery pack with the
the
mark of the wireless charger.
･
Charge the battery putting the wireless charger on the
stable and flat place.
･
Always remove the AC adapter from the outlet when not
using the adapter for an extended period.
･
It is normal if the wireless charger may emit sound when
inserting the power plug into the outlet or putting or
removing the terminal/battery pack on or from the
wireless charger.
･
Charging several terminals or battery packs at the same
time is not available.
･
If charging is not started, remove the terminal or battery
pack from the wireless charger. After approximately 2
seconds, press the Charging assisting button and put the
terminal or battery pack on the
mark.
･
The terminal with a carrying case may not be charged
depending on its material or thickness.
･
If the charge information of the wireless charger flashes
rapidly, it may be an abnormality of charging or
malfunction. Check if no foreign substance between the
wireless charger and terminal, then position the terminal
or remove and insert the power plug from and into the
outlet.
･
If the battery pack becomes hot, charging information
flashes slowly and stop automatically even if the
charging is not complete. Charging resumes
automatically when the battery pack is cooled down to
the right temperature for charging.
･
Place the wireless charger as far as possible from TVs or
radios because charging may cause noises on TVs or
radios.
･
Using electronic devices around the wireless charger
may cause failure of charging. Use electronic devices 30
cm or more away from the wireless charger.
･
If you charge the terminal with a commercially available
marked device, you may not receive incoming calls
while charging.
mark down on
29
Before using the terminal
Advertisement
