Advertisement
◆ Charging with AC adapter
Charge the terminal with FOMA AC Adapter 01/02
(optional) and the FOMA charging microUSB adapter T01
(optional).
a Insert the AC adapter connector to the external
connection jack of the charging microUSB adapter
b Open the jack cap (a) of the terminal, insert the
microUSB plug of the charging microUSB adapter into
the jack (b)
c Insert the AC adapter power plug into an outlet
･
Illumination turns on in red while charging, and turns
off when charging is complete.
d Remove the AC adapter power plug from the wall
outlet when charging is complete.
e Remove the microUSB plug from the terminal, and
close the jack cap
f Remove the AC adapter connector from the charging
microUSB adapter
･
Pull it straight while pressing the release button of
the connector.
Jack cap
Notification LED
To AC 100V
outlet
External connection jack
External connection jack
Connector
AC adapter
Power plug
Release buttons
✔INFORMATION
･
FOMA charging microUSB adapter T01 is an adapter for
connecting the terminal with the AC adapter. If you
connect the terminal with a PC using the FOMA USB
Cable etc., you cannot send/receive data or charge the
terminal. For connection to a PC, use the included USB
Cable for PC connection T01.
◆ Charging with FOMA USB Cable for
PC connection
If you connect the terminal with a PC using the included
USB Cable for PC connection T01, you can charge the
terminal.
･
When "新しいハードウェアの検索ウィザードの開始 (New
hardware detection wizard)" appears on the PC, select "
キャンセル (Cancel)".
microUSB
plug
FOMA charging
microUSB
adapter T01
30
Before using the terminal
Advertisement
