Table of Contents
Advertisement
Chapter 2: Web Configuration
3. Password
This page is used to change the password that enables you to access the gateway web pages next time.
The default User ID is " "(EMPTY), and the password is "admin". The password can be a maximum of
8 characters and is case sensitive. In addition, this page can be used to restore the gateway to its original
factory settings. Use this with caution, as all the settings you have made will be lost. To perform this
reset, set Restore Factory Defaults to Yes and click Apply. This has the same effect as a factory reset
using the rear panel reset switch, where you hold in the switch for 15 seconds, then release.
Fig. 9 Gateway\Status\Password
22
Illustrations contained in this document are for representation only.
Advertisement
Table of Contents
