Table of Contents
Advertisement
Chapter 2: Web Configuration
802.1x Authentication
If you enable the 802.1x authentication function, you will have to offer the following information-
RADIUS Server: RADIUS Server is a protocol for carrying authentication, authorization, and
configuration information between a Network Access Server which desires to authenticate its links
and a shared Authentication Server. Please key in the IP Address for the RADIUS Server.
RADIUS Port: Besides the IP address of the RADIUS Server, you have to enter the port number
for the server. Port 1812 is the reserved RADIUS-authentication port described in RFC 2138.
Earlier AP (RADIUS clients) use port 1945. The default value will be shown on this box. You can
keep and use it.
RADIUS Key: A RADIUS Key is like a password, which is used between IAS and the specific
RADIUS client to verify identity. Both IAS and the RADIUS client must be use the same RADIUS
Key for successful communication to occur. Enter the RADIUS Key.
Illustrations contained in this document are for representation only.
Fig. 34 802.1x Authentication
48
Advertisement
Table of Contents
