Panasonic PT-JX200FWE Operating Instructions (Functional Manual) page 86

4) Press as to select each item, and press qw to change the settings.
[CONNECTION TYPE]
[CHANNEL]
[LOWER BANDWIDTH MODE]
[MOBILE CONNECTION]
5) Press as to select [STORE], and press the <ENTER> button.
6) When the confirmation screen is displayed, press qw to select [OK], and press the <ENTER> button.
Note
f For more information about Intel
application, or visit the Intel Corporation website.
f When switching from [SINGLE] to other items or from other items to [SINGLE] in the [MIRRORING] setting screen, the device may not be
connected. In this case, please eliminate the connection history with the projector at the device.
86 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Selects the connection type for the MIRRORING function.
[PIN]
[AUTO]
Selects the communication channels used by Intel
Enables / disables the lower bandwidth mode of Intel
[OFF]
[ON]
Use mobile devices as necessary when the connection is poor. Usually it is not necessary to use
mobile connection.
[OFF]
[ON]
WiDi or Intel Pro WiDi conference mode, please refer to the HELP of Intel
® ®
A PIN (8-digit number) will be displayed in the idle screen of the
MIRRORING function, and then makes connection by entering the
PIN on the device.
If PIN connection is supported on the device, perform PIN
connection. If it is not supported, perform connection without a PIN.
WiDi / Intel
® ®
WiDi or Intel
®
Disables the lower bandwidth mode.
Enables the lower bandwidth mode. The bit rate will decrease, and
the image quality will reduce.
Disables mobile connection.
Enables mobile connection.
Pro WiDi / Miracast.
Pro WiDi.
®
WiDi or Intel Pro WiDi
® ®