Table of Contents
Advertisement
[SSID]
[AUTHENTICATION]
[ENCRYPTION]
[DEFAULT KEY]
[KEY1] - [KEY4]
[KEY]
[EAP]
[USER NAME]
[PASSWORD]
Note
f If the string of SSID exceeds 16 characters, the SSID is displayed in two lines.
7)
Press as to select [NEXT], and press the <ENTER> button.
f The [Art-Net (WIRELESS LAN)] screen (3/3) is displayed.
f Press as to select [RETURN] and then press the <ENTER> button to return to the [Art-Net (WIRELESS
LAN)] screen (2/3).
8)
Press as to select [DEVICE IP ADDRESS].
84 - ENGLISH
Chapter 4 Settings — [NETWORK] menu
Enter the same string as the SSID registered to the access point.
Select the user authentication method used in the network to which the projector is connected.
[OPEN]
[SHARED]
[WPA-PSK]
[WPA2-PSK]
[WPA-EAP/WPA2-EAP]
[WPA-EAP]
[WPA2-EAP]
Select the encryption method used for the communication between the projector and the network.
[NONE]
[WEP]
[TKIP]
[AES]
Set a number from 1 to 4 for the default key.
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
Set WEP key to the key number selected in [DEFAULT KEY].
It can be selected only when [AUTHENTICATION] is set to [OPEN] or [SHARED], and the encryption
method is [WEP].
You can set a 64-bit or 128-bit WEP key. Enter five single-byte alphanumeric characters (10 digits for
hexadecimal) for 64-bit, or enter 13 single-byte alphanumeric characters (26 digits for hexadecimal)
for 128-bit.
Set the key.
It can be selected when [AUTHENTICATION] is set to [WPA-PSK] or [WPA2-PSK].
Enter 8 to 63 alphanumeric characters or 64-digit hexadecimal.
Select the EAP set for RADIUS server.
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP]. The types of EAP that can be selected are as follows.
[PEAP(MS-CHAPv2)], [PEAP(GTC)], [EAP-TTLS(MD5)], [EAP-TTLS(MS-CHAPv2)], [EAP-FAST(MS-
CHAPv2)], [EAP-FAST(GTC)]
Enter the user name to be used for authentication in single-byte alphanumeric characters (space not
included, 64 characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Enter the password to be used for authentication in single-byte alphanumeric characters (64
characters at the maximum).
It can be selected when [AUTHENTICATION] is set to [WPA-EAP/WPA2-EAP], [WPA-EAP], or
[WPA2-EAP].
Select this item when the authentication method of the access point
is Open System.
Select this item when the authentication method of the access point
is Shared Key.
Select this item when the authentication method of the access point
is WPA-PSK.
Select this item when the authentication method of the access point
is WPA2-PSK.
Select this item when the authentication method of the access point
is WPA-EAP/WPA2-EAP.
Select this item when the authentication method of the access point
is WPA-EAP.
Select this item when the authentication method of the access point
is WPA2-EAP.
Select this item not to use encryption.
It can be selected only when [AUTHENTICATION] is set to [OPEN]
or [SHARED].
Select this item when the encryption method is WEP. It can be
selected only when [AUTHENTICATION] is set to [OPEN] or
[SHARED].
Select this item when the encryption method is TKIP.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
Select this item when you use AES for the encryption method.
It can be selected only when [AUTHENTICATION] is set to [WPA-
PSK], [WPA2-PSK], [WPA-EAP], or [WPA2-EAP].
Advertisement
Table of Contents
