Related Manuals for D-Link DBA-2820P
Summary of Contents for D-Link DBA-2820P
- Page 1 Quick Installation Guide Access Point This document will guide you through the basic installation process for your new access point DBA-2820P Documentation is also available on the D-Link website...
-
Page 3: Hardware Overview
• OS X 10.8.5, Windows 7, Linux (Ubuntu 12) and higher. This installation guide provides instructions Hardware Overview for installing the DBA-2820P on your network. Additional documentation is also available on the D-Link support website. LED Indicators • D-Link Nuclias Access Point Portal Manual: For... -
Page 4: Interface Connectors
1. Use a standard Ethernet cable to connect LAN same subnet as the DBA-2820P. port 1 on the DBA-2820P to a PoE power source device such as a PoE switch or PoE injector. 1. Use an Ethernet cable to connect the DBA-2820P... -
Page 5: Mounting The Access Point
Password: admin Mounting the Access Point Figure 6: Attaching the Lock Plate The DBA-2820P can be mounted on a wall or ceiling 1. Clip the two included ceiling brackets onto the for optimal coverage. ceiling crossbar. Make sure both brackets are Mounting on a Solid Wall or Ceiling positioned in line with each other. -
Page 6: Troubleshooting
3. Connect the Ethernet cable and power adapter and is managed through the D-Link Nuclias cloud. (optional) to the device. 4. Attach the DBA-2820P to the mounting plate by If you are experiencing problems connecting placing it onto the plate and rotating clockwise to the D-Link Nuclias cloud, check your Internet until the device locks into place. - Page 7 Appendix - Statements ErP Power Usage This device is an Energy Related Product (ErP) that automatically switches to a power-saving Network Standby mode within 1 minute of no packets being transmitted. It can also be turned off through a power switch to save energy when it is not needed. Network Standby: 7.27 watts Switched Off: 0.06 watts Federal Communication Commission Interference Statement...
- Page 8 IMPORTANT NOTICE: FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 37cm between the radiator and your body. Innovation, Science and Economic Development Canada (ISED) Statement: This Class B digital apparatus complies with Canadian ICES-003.
- Page 9 Install and use the equipment according to the instruction manual. 電波法により5GHz帯は屋内使用に限ります。 Product and Warranty Information To find out more about D-Link products or marketing information, please visit the website http://www. dlink.com. The D-Link Limited Lifetime Warranty information is available at http://warranty.dlink.com/...
- Page 10 NOTES...
- Page 11 NOTES...
- Page 12 NOTES...
- Page 13 NOTES...
- Page 14 NOTES...
- Page 15 NOTES...
- Page 16 Ver. 1.00(WW)_90x130 2019/05/28 290726002820A10...