Patton electronics RocketLink-G 3008/I Quick Start Manual page 5

3.0 Connect to the local IP network
Now you can connect the RocketLink-G NTU to your local IP network and complete the remaining configuration
from your PC using a standard web browser.
Connect the RocketLink-G NTU's Ethernet port (green) to the same Ethernet segment as your PC (see
figure 3).
The front-panel Ethernet Link LED should turn on. If it does not, press the rear-panel MDI-X switch so that the
Ethernet Link LED illuminates.
You can check the connection with the ping command. For example shown in 3, you would ping
figure
10.10.4.10 from a PC on the IP network.
e
L i n
e t
r n
h e
E t
I - X
M D
o l e
n s
C o
r
w e
P o
PC
MDI-X switch
Ethernet port
Connect to Ethernet port
Connecting the RocketLink-G to the local IP network (Model 3088/I shown)
Figure 3.
Model 3088/I Quick Start Guide 5