Chapter 3 Basic Operations - Basic operations by using the remote control
Using the information function
This function allows you to display the status of the projector.
button
1)
Press the <INFO.> button on the remote control.
f The [Info.] screen is displayed.
f When the [Info.] screen is recalled by using <INFO.> button on the remote control, the on-screen menu cannot be
operated.
2)
Press the <INFO.> button again.
f The [Info.] screen disappears.
Note
f For more details, refer to the [Info.] menu (x page 76).
Using the freeze function
You can freeze the projected image and stop the sound temporarily, regardless of the playing condition of the external device.
button
1)
Press the <FREEZE> button on the remote control.
f The video is paused and the audio is muted. The icon
2)
Press the <FREEZE> button again.
f The video playback resumes and the audio is unmuted.
Note
f When no signal input, the key operation is invalid and the icon
Using the AV mute function
If the projector is not used for a certain period of time during the meeting intermission, for example, it is possible to turn off the
audio and image temporarily.
button
1)
Press the <AV MUTE> button on the remote control.
f The audio and image turn off.
2)
Press the <AV MUTE> button again.
f The audio and image turn on.
Using the presentation timer function
You can operate the P-timer function.
Presentations, etc. can be performed while checking the elapsed time.
button
1)
Press the <P-TIMER> button on the remote control.
f The count is started.
f The elapsed time is displayed at the bottom right of the projected image.
2)
Press the <P-TIMER> button again.
f The count is stopped.
3)
Press the <P-TIMER> button again.
f P-timer is finished.
Switching the lamp power
This function allows you to switch the lamp power.
is displayed on the screen during Freeze.
will appear.
ENGLISH - 43