Switching The Aspect Ratio Of The Image; Using The Keystone Distortion And Curved Correction Functions; Using The Information Function - Panasonic PT-TW341 Operating Instructions Manual

Chapter 3 Basic Operations - Basic operations by using the remote control
Note
f For more details about Memory Viewer function, refer to "Memory Viewer function" (x page 78).
f For more details about USB display function, refer to "USB Display function" (x page 80).

Switching the aspect ratio of the image

You can switch aspect ratios according to the input signal.
button
1) Press the <ASPECT> button on the remote control.
Note
f For more details, refer to the [Display] menu → [Aspect] (x page 49).

Using the keystone distortion and curved correction functions

You can correct the trapezoidal distortion and the curved distortion of the projected image.
button
1) Press the <KEYSTONE> button on the remote control.
f The selection screen of keystone function is displayed.
f You can also press the <KEYSTONE> button on the control panel.
[H/V Keystone]
[Corner correction]
[Curved correction]
[Reset value]
2) Press as to select [H/V Keystone], [Corner correction], [Curved correction] or [Reset value].
3) Press the <ENTER> button.
f The individual adjustment screen of the selected function is displayed.
4) Press asqw to adjust.
Note
f For more details, refer to the [Expand] menu → [Keystone] (x page 60).
f Press the <KEYSTONE> button on the control panel or on the remote control when the [H/V Keystone], [Corner correction]
or [Curved correction] individual adjustment screen is displaying, the individual adjustment screen will switch as follows.
- [H/V Keystone]  [Corner correction] (Upper left)  [Corner correction] (Upper right)  [Corner correction] (Lower right)
 [Corner correction] (Lower left)  [Curved correction X/Y Gain]  [Curved correction X Offset]  [Curved correction Y
Offset]  [H/V Keystone]  ...

Using the information function

This function allows you to display the status of the projector.
button
1) Press the <INFO.> button on the remote control.
f The [Info.] screen is displayed.
f When the [Info.] screen is recalled by using <INFO.> button on the remote control, the on-screen menu cannot be
operated.
2) Press the <INFO.> button again.
f The [Info.] screen disappears.
38 - ENGLISH
Select when the trapezoid of the projected image is distorted.
Select when the four corners of the projected image are distorted.
Select when the linearity is not uniform or the projected image is curved distortion.
Return the corrected values to the factory default values.