Panasonic PT-LW373 Operating Instructions (Functional Manual) page 110

Projection scheme
Built-in speaker
<COMPUTER 1 IN>
<COMPUTER 2 IN>
<MONITOR OUT>
Termi-
nals <VIDEO IN>
<HDMI IN>
<AUDIO IN>
<VARIABLE AU-
DIO OUT>
<USB A (VIEWER/
WIRELESS)>
*4
<USB B
(DISPLAY)>
<USB B >
<SERIAL IN>
<LAN>
*4
Power cable length
Cabinet
Dimensions
Weight
Noise level *
6
Operating
environment
Operating
temperature *
environ-
Operating
ment
environment
humidity
Power supply
Operating range
Remote
control
Weight
Dimensions
110 - ENGLISH
Chapter 7 Appendix - Specifications
[Front], [Rear], [Ceiling/Front], [Ceiling/Rear] (Menu setting system)
PT-LW373, PT-LW333, PT-LB423,
PT-LB383, PT-LB353
PT-LB303
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
[YP P signal] Y: 1.0 V [p-p] including synchronization signal, P
B R
[Y/C signal] Y: 1.0 V [p-p] C: 0.286 V [p-p] 75 Ω S1 signal compatible
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, automatic positive/negative polarity compatible
*4
VD TTL high impedance, automatic positive/negative polarity compatible
(HD/SYNC and VD do not support 3 value SYNC.)
1 (High-density D-sub 15 pin female)
[RGB signal] 0.7 V [p-p] 75 Ω
HD/SYNC TTL high impedance, positive/negative polarity compatible
VD TTL high impedance, positive/negative polarity compatible
1 (Pin jack 1.0 V [p-p] 75 Ω)
1 (HDMI 19 pin, HDCP and Deep color compatible)
Audio signals: Linear PCM (Sampling frequency: 48 kHz/44.1 kHz/32 kHz)
1 (M3 stereo mini jack, 0.5 V [rms], input impedance 22 kΩ and more)
1 (Pin jack x 2 (L-R), 0.5 V [rms], input impedance 22 kΩ and more)
1 (M3 stereo mini jack, stereo monitor output compatible,
0 V [rms] to 2.0 V [rms] variable, output impedance 2.2 kΩ and less)
USB connector (type A x 1, output DC 5 V, 500 mA maximum)
Memory Viewer / Wireless module (Model No.: ET-WML100) compatible
PT-LW373, PT-LW333, PT-LB423,
PT-LB383, PT-LB353
PT-LB303
1 (D-sub 9 pin, RS-232C compliant, for computer control use)
1 (for RJ-45 network connection, PJLink compatible, 10Base-T/100Base-TX)
1.8 m (70-7/8")
Molded plastic
Width: 335 mm (13-3/16")
Height: 96 mm (3-25/32") (when adjustable foot shortened)
Depth: 252 mm (9-29/32")
PT-LW373, PT-LW333, PT-LB423,
PT-LB383, PT-LB353
PT-LB303
When set to [ (Normal)] in [Lamp control] : 37 dB
When set to [ (Eco 1)] in [Lamp control] : 33 dB
When set to [ (Eco 2)] in [Lamp control] : 28 dB
5 °C (41 °F) to 40 °C (104 °F) (Elevation: below 1 400 m (4 593'); [High land]: [Off])
5 °C (41 °F) to 35 °C (95 °F) (Elevation: 1 400 m (4 593') ~ 2 700 m (8 858'); [High land]: [On 1])
5 °C (41 °F) to 30 °C (86 °F) (Elevation: 2 700 m (8 858') ~ 3 000 m (9 843'); [High land]: [On 2])
7
20 % to 80 % (no condensation)
DC 3 V (AAA/R03/LR03 battery x 2)
Approx. 5 m (16'4-13/16") (when operated directly in front of receptor)
63 g (2.22 ozs.) (including batteries)
Width : 44 mm (1-23/32"), Length : 105 mm (4-1/8"), Height : 20.5 mm (13/16")
10 W (monaural) x 1
2 W (monaural) x 1
USB connector (type B x 1), only for USB Display
USB connector (type B x 1)
Approx. 2.9 kg (6.39 lbs.) *
Approx. 2.8 kg (6.17 lbs.) *
P : 0.7 V [p-p] 75 Ω
B R
5
5