[Hdmi Setup] - Panasonic PT-LW373 Operating Instructions (Functional Manual)

4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
f You can also press the <MUTE> button on the remote control. (x page 45)
[On]
[Off]

[HDMI Setup]

Switch the setting when the external equipment is connected to the <HDMI IN> terminal of the projector and the image is not
projected correctly. Or switch the setting of the audio input.
[Image]
1) Press as to select [HDMI Setup].
2) Press the <ENTER> button.
f The [HDMI Setup] screen is displayed.
3) Press as to select [Image].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[Auto]
[64-940]
[0-1023]
Note
f The optimal setting varies depending on the output setting of the connected external device. Refer to the operation
instruction of the external device regarding the output of the external device.
[Sound]
1) Press as to select [HDMI setup].
2) Press the <ENTER> button.
f The [HDMI setup] screen is displayed.
3) Press as to select [Sound].
4) Press the <ENTER> button.
5) Press as to switch the item.
f The items will switch each time you press the button.
[HDMI]
[Computer]
Chapter 4 Settings - [Setting] menu
Audio is not output.
Audio is output.
Set the signal level automatically.
Select when the HDMI terminal of an external device (such as a blu-ray player) is connected to the
<HDMI IN> terminal.
Select when the DVI-D terminal output of an external device (such as a computer) is connected
to the <HDMI IN> terminal via a conversion cable or similar cable. Select also when the HDMI
terminal output of a computer or other device is connected to the <HDMI IN> terminal.
When HDMI input is selected, the sound of HDMI will be output.
When HDMI input is selected, the sound which is input to the <AUDIO IN 1> terminal will be
output.
ENGLISH - 61