About Memory Viewer Function; What You Can Project With The Memory Viewer Function; Cautions On Using Usb Memory; Displaying The Memory Viewer Screen - Panasonic PT-LW373 Operating Instructions (Functional Manual)

Chapter 5 Operation of Function - About Memory Viewer function

About Memory Viewer function

(Only for PT-LW373, PT-LW333, PT-LB423, PT-LB383 and PT-LB353)
The Memory Viewer function makes it is possible to project the still image stored in the USB memory.

What you can project with the Memory Viewer function

Memory Viewer function supports the following image files.
Extension
jpg/jpeg
bmp
Picture
png
gif
tif / tiff
Note
f The maximum size of file is 2 GB.
f The total number of folders/files that can be displayed is about 500 at the maximum. In addition, other than the supported
format as the above table cannot be displayed.
f You cannot play the files which is protected by Digital Rights Management (DRM).

Cautions on using USB Memory

Please observe the following.
f Do not put USB memory or its cap within close reach of children. Swallowing them may cause suffocation.
f If the smoke or questionable odor rise, remove the USB memory from the projector, and then contact your dealer.
f Do not put water, chemical or oil to the USB memory. It may cause short out or fire.
f Do not put foreign objects or put metal objects to the USB terminal. Static electricity may cause data loss or data corruption.
f Do not remove the USB memory from the computer or the projector while the USB memory is reading out or writing the data.
It may cause data loss or data corruption.
f Do not store the USB memory where high temperature, humid or dusty place or magnetized items are around.
Note
f It is compatible with the USB memory sold in the market.
f It cannot be used the other format other than the formatted with FAT16 and FAT32.
Inserting the USB memory
1) Insert the USB memory directly into the <USB A (VIEWER/WIRELESS)> terminal.
Attention
f When inserting the USB memory, confirm the direction of the plug and do not damage the terminal.
Removing the USB memory
1) Make sure that the USB memory is not flashing, and then unplug it.
Attention
f Please note following points when removing the USB memory.
- The indicator of the USB memory is blinking means that the projector is reading out the data. Do not remove the USB
memory while it is blinking.
- When using a USB memory without an indicator, you cannot recognize when the projector reading out the data. Please
remove it from the projector after closing the memory viewer function or turning off the projector.
- Do not insert and remove the USB memory in a short time. Remove the USB memory at least five seconds after inserting.
And insert it at least five seconds after removing. When inserting or removing the USB memory, the projector takes about
five seconds to identify the operation.
Note
f The USB memory can be inserted or removed regardless of the power status of the projector.

Displaying the Memory Viewer screen

1) Press the <MEMORY VIEWER/USB DISPLAY/NETWORK> button on the remote control or switch the
input source to [Memory Viewer].
78 - ENGLISH
Format
Baseline coding 24 bits
Progressive RGB 24 bits
Palette-based 1, 4, 8 bits,
RGB 24, 32 bits
True color 24 bits/48 bits
Palette-based 1, 4, 8 bits,
Description
Resolution : 8 x 8 ~ 10 000 x 10 000
Resolution : 8 x 8 ~ 1 280 x 800
The maximum resolution : 1 280 x 800
The maximum resolution : 1 280 x 800
Palette - 24 bits color spaces;
The maximum resolution : 1 280 x 800
The maximum resolution : 1 280 x 800