Danby DDW611W Owner's Use And Care Manual page 6

Operating Instructions
PRIOR TO USING FOR THE FIRST TIME
A. FILL THE RINSE
AID DISPENSER
RINSE AID DISPENSER
The rinse aid is released during the final rinse to prevent water from form-
ing droplets on your dishes that can leave spots and streaks. It also
improves drying by allowing water to sheet off the dishes. Your dishwash-
er is designed to use liquid rinse aids. The rinse aid dispenser is located
inside the door next to the detergent dispenser. To fill the dispenser, open
the cap and pour the rinse aid into the dispenser until the level indicator
turns completely black. The volume of the rinse aid container is about
110ml.
FUNCTION OF RINSE AID
Rinse aid is automatically added during the last rinse, ensuring thorough
rinsing, and spot and streak free drying.
Never fill the rinse aid dispenser with any other substances (e.g.
dishwasher cleaning agent, liquid detergent). This would damage
the appliance.
Use Jet-Dry Rinse Agent
Jet-Dry rinse agent removes spots and prevents new film buildup on your
dishes, glasses, flatware,cookware and plastic.
Filling the Dispenser
The rinse agent dispenser holds 3.5 oz. of rinse agent. Under normal
conditions, this will last approximately one month. Try to keep it full, but do
not overfill.
1. Make sure the dishwasher door is fully open.
2. Turn the dispenser knob to the left and lift it out.
3. Add rinse agent until the indicator window looks full.
4. Clean up any spilled rinse agent with a damp cloth.
5. Replace the dispenser knob.
ADJUSTING RINSE AID DISPENSER
Remove the dispenser knob; then turn the adjuster counterclockwise
to increase the amount of rinse agent.
Indicator
MAX
Adjustable setting
Dispenser cap
5
ATTENTION
ATTENTION
Clean up any rinse aid
spills during filling with
an absorbent cloth to
avoid excessive foaming
during the next wash.
Don't forget to replace
the cap before you close
dishwasher door.