How to use
Cleaning Dust bin
Dust bin
release button
①
Dust bin
Clean and dry
① To detach the dust bin, push and hold the release button and pull it in arrow direction.
② Remove the filter cover assembly in the direction indicated by the arrow, then remove
the dust separator from the dust bin.
(Beware that the dust that may fall from the filter in the process.)
③ Empty the dust bin.
④ Separate the inner filter from the filter cover as shown in Fig.1.
⑤ Rinse the detached filter under water until the water runs clear and completely dry
the filter in the shade.
(Do not use hot water or detergent. They may cause deformation to the filter.)
Helpful tip
• To maintain the vacuum cleaner, clean the filter once a week with a cleaning brush
or by using another vacuum cleaner, and at least twice a month with water.
(Frequent cleaning of the filter can help maintain its performance.)
• To maintain the best performance of your vacuum cleaner, empty the dust bin after
every use.
• After cleaning the dust separator, be sure to put it back into the dust bin.
• Always use the vacuum cleaner with the dust separator assembled. If not, dust will
be sucked into the main body and motor, causing a malfunction and damage to the
vacuum cleaner.
②
Inner Filter
(non mesh side)
⑤
Filter cover
Inner Filter
Dust separator
④
③
Fig.1
13