Charging - LG VS86 Series Owner's Manual

How to use

Charging

1
➊ If the voltage gets low during
operation, the power is
automatically turned off to
protect the battery.
You must then recharge the
battery.
Before beginning the recharge,
check that the hand held cleaner
is properly docked to the main
body, and then place it on the
charging stand.
Helpful tip
• Storing the battery for a long time without being charged may cause battery failure.
• If you want to store the product for a long period of time, be sure to charge the battery fully every
six months.
12
Battery indicator
Charging indicator
➋ The charging time may vary depending on the battery condition.
When the minimum amount of charge is left, it takes about
4.5 hours to fully charge the battery. (Charging one battery)
• The battery fitted to the vacuum cleaner is charged first, and
then the battery attached to the charging stand is charged.
• While the hand held cleaner is charging, the battery indicator
light blinks to show the charge amount.
• When the battery is fully charged, the hand held battery status
indicator stays on.
• While the battery on the charging stand is charging, the single
LED indicator on the charging stand will blink, and when the
battery is fully charged, the LED will remain on.
• If the vacuum is not used for a long period of time, it is
recommended to, remove the charging adaptor plug from the
wall socket.
• To get a full charge for the two discharged batteries at the same
time, it may take up to 9 hours.
2