Leveling The Appliance - LG F70E1UDNK1 Owner's Manual

Using the Drain Hose Connector
Connect the drain hose of the front-lading washing
machine and the pedestal washing machine to the
drain connector. Insert the included wire hose clamps
on to the ends of the two drain hoses. Push the drain
hoses firmly onto the drain connector. Adjust the wire
hose clamps to prevent the hoses from coming loose
or leaking. Failure to do so could result in flooding.
Use of the drain connector helps avoid siphoning,
odors, or improper draining.
Drain hose
connector

Leveling the Appliance

If the floor is uneven, turn the adjustable feet as
required (Do not insert pieces of wood etc. under
the feet). Make sure that all four feet are stable and
resting on the floor and then check that the appliance
is perfectly level (Use a spirit level).
• Once the appliance is level, tighten the lock nuts
up towards the base of the appliance. All lock nuts
must be tightened.
Raise
Lock nut
Diagonal Check
• When pushing down the edges of the top plate
diagonally, the appliance should not move up and
down at all (check both directions). If the appliance
rocks when pushing the machine top plate
diagonally, adjust the feet again.
WARNING
• When stacking the front-loading washing machine
on the pedestal washing machine, use the leveling
feet on the pedestal washing machine to level
both. The front-loading washing machine´s leveling
feet should be minimized and the locknuts turned
counterclockwise to secure them.
NOTE
• Timber or suspended type flooring may contribute
to excessive vibration and unbalance.
• If the washing machine is installed on a raised
platform, it must be securely fastened in order to
eliminate the risk of falling off.
EN
Lower
Tighten all 4
lock nuts securely
15