Table of Contents
Advertisement
How to Handle Freezing
Step 1. When the Door is Frozen
• Thaw out the door using a hot water cloth.
Step 2. When the Water Supply Hose is
Frozen
icon may blink on the display when
•
water supply problems occur, take the following
measures.
− Take out water supply hose and connect to the
tap and check that water comes from the tap
and supply hose.
− Turn off the tap, and thaw out the tap and both
connection areas of supply hose of the product
using a hot water cloth.
− Take out supply hose and immerse in warm
water below 50–60 °C.
Supply
50‒60 °C
hose
Step 3. When the Drain Pump is Frozen
,
icon may blink on the display when
•
drain pump problems occur, take the following
measures.
1
Pour 15 ℓ warm water below 50–60 °C in the
drum until washing machine wing nuts are
immersed and wait for an hour.
2
Press the Power button and then run the Boil
Wash programme for an hour.
• When
icon appears on the display,
repeat steps 1 to 2.
3
Turn off the power when the Boil Wash
programme is finished. If the drawer is open,
select the Extra Rinse to the number of 9 and
press the Start/Pause button to run the Spin.
28
4
Select the Rinse+Spin programme and press
the Start/Pause button to check that the
washing machine works.
5
When
icon appears on the display, thaw
out the drain hose inner part with the hot water.
EN
Advertisement
Table of Contents
