Table of Contents
Advertisement
Symptoms
Washing machine
will not drain water
Poor stain removal
Wash cycle time is
longer than usual
Musty or mildewy
odor in washing
machine
Washing machine
chimes repeatedly
before final rinse
Reason
Kinked drain hose.
Drain located higher than 2.4 m
above the floor.
Heavily soiled load.
Previously set stains.
The washing machine
automatically adjusts the wash
time for the amount of laundry,
water pressure and other
operating conditions.
Incorrect or too much detergent
has been used.
Inside of drum was not cleaned
properly.
This is not an error.
Solution
• Ensure that the drain hose is not kinked.
• Make sure that the drain hose is no higher
than 2.4 m above the bottom of the washing
machine and is no more than 1.5 m away
from the washing machine.
• Use the front-loading washing machine.
• Articles that have previously been washed
may have stains that have been set. These
stains may be difficult to remove and may
require hand washing or pre-treating to aid in
stain removal.
• This is normal. The washing machine
adjusts cycle time automatically to provide
optimal results for the selected programme.
The time remaining shown in the display is
only an estimate. Actual time may vary.
• This machine requires very little detergent.
Use the provided detergent measuring cup.
• Run the Tub clean programme regularly.
• This is an alert to allow the addition of liquid
fabric softener before the final rinse.
EN
33
Advertisement
Table of Contents
