Toshiba QOSMIO G50 User Manual page 139

USB -> Built-in
HDD1 -> Built-in
HDD2
USB -> Built-in
HDD2 -> Built-in
HDD1
If a boot command is not found on the first detected hard disk drive, the
system will not boot from next hard disk drive in the list, instead it will
search for the next device in the Boot Priority list and startup from this
as appropriate.
Although, generally, most models have two hard disk drives installed,
some models have only one hard disk drive. In the case of models with
one hard disk drive, this setting item will not be displayed.
USB Memory BIOS Support Type
This option allows you to set the type of the USB memory to be used as a
startup device.
HDD
FDD
Keyboard
Wake-up on Keyboard
When this feature is enabled, and the computer is in Sleep Mode, you can
turn on the system by pressing any key. However, please be aware that this
option will only work with the internal keyboard and only when the computer
is in Sleep Mode.
Enabled
Disabled
User's Manual
The priority is set as USB -> built-in HDD1 ->
built-in HDD2.
The priority is set as USB -> built-in HDD2 ->
built-in HDD1.
Sets the USB memory to be the equivalent of a
hard disk drive (default). With this setting, the
USB memory device can be used to start the
computer as though it were a hard disk drive
based on the hard disk drive settings within both
the Boot Priority and HDD Priority options
detailed previously.
Sets the USB memory to be the equivalent of a
floppy diskette drive. With this setting, the USB
memory device can be used to start the
computer as though it were a floppy diskette
based on the floppy diskette drive settings within
the Boot Priority option detailed previously.
Enables the Wake-up on Keyboard function.
Disables the Wake-up on Keyboard function
(Default).
Qosmio G50
7-5