Table of Contents
Advertisement
5 Operation
Result:
and
disappear from the LCD and the timer
lamp goes off.
and the day of the week are displayed on the
LCD.
5.9.3
To combine OFF timer and ON timer
1 To set the timers, refer to
operation" [ 4 9]
and
operation" [ 4 9].
Result:
and
are displayed on the LCD.
Example:
Display
Current time
6:00
Note: If the timer setting is active, the current time is NOT displayed
on the LCD.
5.10
Weekly timer operation
With this operation, you can save up to 4 timer settings for each day
of the week.
Example: Create a different setting from Monday to Friday and a
different setting for weekends.
Day of the week
Setting example
Monday
ON
25°C
▪ Make up to 4 settings.
6:00
Tuesday~Friday
ON
25°C
▪ Use the copy mode if the
6:00
settings are the same as
for Monday.
Saturday
—
▪ No timer setting
Sunday
▪ Make up to 4 settings.
▪ ON-ON-ON-ON setting. Enables scheduling the operation mode
and set temperature.
▪ OFF-OFF-OFF-OFF setting. Only the turn off time can be set for
each day.
Note: Be sure to aim the user interface at the indoor unit and check
for a receiving tone when setting the Weekly timer operation.
INFORMATION
The clock MUST be set correctly before using any timer
functions. Refer to
"4.3 To set the
INFORMATION
▪ Weekly timer and OFF/ON timer operation CANNOT be
used at the same time. The OFF/ON timer operation
takes priority. Weekly timer will be in standby,
disappears from the LCD. When the OFF/ON timer is
completed, the Weekly timer becomes active.
▪ The day of the week, OFF/ON timer mode, time and
temperature (only for ON timer) can be set with the
Weekly timer. Other settings are based on previous ON
timer setting.
Operation manual
10
"5.9.1 To start/stop OFF timer
"5.9.2 To
start/stop
ON
Set while...
Operation
the unit is
Stops at 7:00
operating.
and starts at
14:00.
the unit is NOT
Starts at 14:00.
operating.
1
2
3
OFF
ON
25°C
27°C
8:30
17:30
22:00
1
2
3
OFF
ON
25°C
27°C
8:30
17:30
22:00
1
2
3
4
ON
OFF
OFF
ON
25°C
27°C
8:00 10:00
19:00 21:00
clock" [ 4 5].
5.10.1
To set Weekly timer operation
1 Press
.
Result: The day of the week and the reservation number of the
current day are displayed.
timer
2 Press
or
reservation number.
3 Press
Result: The day of the week is set.
4 Press
or
Result: The setting will change as follows:
Display
Blank
4
5 Press
OFF
Result: The OFF/ON timer mode is set.
blink.
4
OFF
Note: Press
selected, continue to step 9.
6 Press
or
between 0:00~23:50 in 10-minute intervals.
27°C
7 Press
Result: The time is set and
blink.
Note: Press
is selected, continue to step 9.
8 Press
or
Note: The set temperature for the weekly timer is displayed only
when setting the weekly timer mode.
INFORMATION
The temperature can be set between 10~32°C on the user
interface, however:
▪ in cooling and automatic operation mode, the unit will
operate at minimum 18°C even if is set at 10~17°C;
▪ in heating and automatic operation mode, the unit will
operate at maximum 30°C even if is set at 31~32°C.
9 Press
Result: The temperature and time are set for the ON timer. The
time is set for the OFF timer. The timer lamp lights orange.
to select the day of the week and the
.
and
to select the mode.
Feature
ON timer
OFF timer
Deletes reservation
.
to return to the previous screen. If blank is
to select the time. The time can be set
.
and the temperature
to return to the previous screen. If OFF timer
to select the desired temperature.
.
FTXTM30+40R2V1B
Daikin room air conditioner
3P485919-14U – 2021.03
blink.
and the time
Advertisement
Table of Contents
