Motorola MBP944CONNECT User Manual page 47

General What is the
significance of LED
flashing?
Connectivity I am not able to
Issues access my Camera.
Setting Up During setup on
devices for
Android™ and iOS, I
am not able to find
my Camera during
the last step and the
setup fails.
Help
A flashing LED indicates the
following status:
Slow flashing: 1. Your Camera is
in setup mode. You can add the
Camera to your account in this
mode. Out of the box, the
Camera is in Setup mode. To
reset to Setup mode, press and
hold the PAIR button on the
bottom of the Camera untill you
hear a beep.
Slow flashing: 2. The Camera is
either connecting to the router
or has lost the link to the router.
Please ensure that the Camera is
®
in the Wi-Fi signal range.
LED is stable: The Camera is
connected to the Wi-Fi
Please check if the Camera is
®
within Wi-Fi range. If the LED on
your Camera is flashing slowly,
please try to move the Camera
closer to the router for better
®
Wi-Fi connectivity and try again.
Please reset the Camera to setup
mode and try again. Press and
hold the PAIR button on the
bottom of the Camera untill you
hear a beep. Wait for a minute
for the Camera to restart. When
the Camera LED is flashing, this
indicates that it is in setup mode.
Now restart the setup from your
smartphone again.
®
network.
47