Digital Watchdog DWC-MV72Wi28TW User Manual page 9

Installation -
Installation Using Mount Bolt and Nut
Template Sheet
1. Using the mounting template for the nuts and
bolts installation, mark and drill the necessary
holes in the wall or ceiling.
2. Pass the wires through and make all necessary
connections. See page 10 for more information.
3. Secure the two long mounting screws to the
camera's base.
4. Mount the camera to the
mounting surface using
the 2 mounting nuts.
5. Rotate the locking
discs over the screws
until the camera is
held tightly from the
mounting surface.
6. Adjust the camera
module's position by using
its 3-axis gimbal. The camera can:
•
•
•
7. Assemble the cover over the camera body. Be
sure to assemble the cover and bottom case
to match the case outline.
8. When the installation is completed, remove
the protective film.
9
Rotate: 360°
Pan: 355°
Tilt: 60°