Table of Contents
Advertisement
MAINTENANCE PROCEDURE
METHOD FOR CHECKING OIL LEVEL IN AXLE CASE AND ADDING OIL
•
When checking the oil level, apply the parking brake and fix the front and rear frames using the
frame lock bar.
•
Immediately after the engine is stopped, parts and oil are still very hot. Wait for the temperature to
go down, and then start the work.
If ooze of oil is recognized on the axle case, perform the checks.
Place the machine on a level ground before starting the check.
(If the machine is inclined in the right or left, the oil level cannot be checked correctly.)
A: Front, B: Rear
1.
Stop the engine and remove plug (1).
2.
Wipe off oil of dipstick (G) installed to plug (1) with a cloth.
4-28
k
k
WARNING
MAINTENANCE
Advertisement
Chapters
Table of Contents
