Table of Contents
Advertisement
ATTACHMENTS AND OPTIONS
2.
While pulling the lock (a) of the quick coupler attachment
switch in arrow direction (b), push it into decoupling posi-
tion (A).
•
Keep the quick coupler attachment switch pressed un-
til the work of the step 8 is completed.
•
When you release the quick coupler, the quick coupler
lock release pilot lamp (1) lights up, and the alarm
buzzer sounds intermittently.
3.
Operate the lever from "HOLD" position (B) to "TILT" posi-
tion (e) while the quick coupler attachment switch is press-
ed into (A). Retract the coupler plunger while keeping it at
"TILT" position (e) from the state that the coupler contacts
to the tilt-end stopper.
4.
Check that the lock pins have been removed. The lock pin
indicators (3) may not be visible.
5.
Operate the lever from "HOLD" position (B) to "DUMP" po-
sition (f), and set the coupler tilted forward.
HANDLE HYDRAULIC TYPE QUICK COUPLER
g0038103
6-19
Advertisement
Chapters
Table of Contents
