Komatsu H70051 Series Operation & Maintenance Manual page 171

OPERATION
Switch operation and transition of traction mode
(*4): Select the traction level on the machine monitor.
(*5): Press (A) lightly to return it to the position (B).
DIRECTIONAL SELECTOR SWITCH ACTUATION SWITCH
The directional selector switch can be enabled by setting the
directional selector switch actuation switch to "enable".
Position (A): Directional selector switch is enabled.
Position (B): Directional selector switch is disabled.
REMARK
• When setting the directional selector switch actuation
switch to "disable", set the directional lever and the direc-
tional selector switch to NEUTRAL position. The direction-
al selector switch actuation switch does not function if they
are in the position other than NEUTRAL.
• Even when the directional selector switch is functioning, if
the directional lever is operated, the directional lever oper-
ation is given priority.
ATTACHMENT SELECTOR SWITCH
(if equipped)
The attachment selector switch is used to switch the bucket po-
sitioner and fork positioner.
(A) Bucket positioner
Set to this position when using the bucket.
(B) Fork positioner
Set to this position when using the fork.
REMARK
When the fork positioner is selected, the PZ auto tilt-in function
is not effective.
EXPLANATION OF COMPONENTS
3-105