Installation; Starting The Machine - Saeco 10002684 Operating And Maintenance Manual

STARTINg THE mACHINE

Make sure the power button is not pressed and the machine is turned off.
1
Open the coffee bean hopper by
pressing the button on the lid. Fill
the bean hopper with coffee
beans.
4
Fill the tank with fresh drinking
water. Do not exceed the "max"
level indicated on the water tank.
Once fi lled place the tank back
into the machine.
7
Press the power button once to turn
on the machine. the appliance
automatically performs a diagnosis of
its functions. this test is performed
each time the machine is turned on.
ing
bEfORE A LONg PERIOD Of INACTIVITY, AND bEfORE THE mACHINE IS RESTARTED, PLEASE
on
CHECK THE RELEVANT INfORmATION IN THE CLEANINg AND mAINTENANCE SECTION.
2
Close the lid pushing it down
completely.
5
insert the plug into the socket
located on the back of the
machine and insert the other end
into a power outlet with suitable
current.
The machine automatically primes the water circuit.
The machine is now ready for use.
Water may not be dispensed during this cycle.
This should not be considered a malfunction.
TO ADjUST THE WATER HARDNESS LEVEL AND SET
THE INTENZA AROmA SYSTEm SEE THE «WATER
HARDNESS mENU» ON PAgE 21.

InsTallaTIon

3
Remove the water tank.
We recommend installing the water
fi lter (see page 7).
6
Place a container beneath the hot
water spout.
5