Table of Contents
Advertisement
Step 4: Connecting FM/MW
antennas
•
●
Connect the supplied MW loop antenna to the
MW jack. Place the MW loop antenna on a
shelf or attach it to a stand or wall.
●
Connect the supplied FM antenna to the FM
jack. Extend the FM antenna and fix its end to
the wall.
For better FM stereo reception, connect an
outdoor FM antenna to the FM ANTENNA
terminal.
Notes:
– Adjust the position of the antennas for optimal
reception.
– Position the antennas as far as possible from
your TV set, VCR or other radiation sources to
prevent unwanted interference.
●
Connect the T-TYPE antenna (not for all
countries) to the FM jack at the back panel of
the unit. and then fix it to the wall as shown.
Notes:
– For better reception, please make sure that the
two prongs of the T-TYPE antenna are in alignment
with each other.
( )
T - TYPE
antenna
Connections
Step 5: Connecting the power
cord
COMPONENT
VIDEO IN
S-VIDEO
IN
AUDIO
Pr/Cr
OUT
~ AC MA INS
Pb/Cb
VIDEO IN
Y
After everything is connected properly,
plug in the AC power cord to the power
outlet.
Never make or change any connection with the
power switched on.
On the DVD Mini Hi-Fi System
"AUTO INSTALL-PRESS PLAY" may appear
on the display panel. Press 2; on the front panel
to search and store all available radio stations or
press 9 to exit (See page 36, Tuner Operations-
Presetting radio stations).
If your system is equipped with a
Voltage Selector, set the
VOLTAGE SELECTOR to the
local power line voltage.
DIN OUT
SPE A KE R 3
SPE A KE R 3
VOLTAGE
SELECTOR
220V~240V
110V~127V
876
SURROUND
13
Advertisement
Table of Contents
