Table of Contents
Advertisement
Disc Operations
MENU OFF:
●
Press MODE repeatedly to select the following:
REPEAT TRACK ➜ REPEAT DISC ➜ SHUFFLE
ON ➜ SHUFFLE OFF ➜ REPEAT OFF
Notes:
– In Tuner, Tape or AUX mode, this button does not
function.
– When you open the disc tray, the Repeat/shuffle
function will be cancelled automatically.
– For SVCD and VCD 2.0 discs, the Repeat/shuffle
function is not available when the PBC function is
set to ON.
– If discs of different formats are loaded, the
Repeat function is only available for the current
disc.
Repeating a section within a chapter/
track
You can play a specific section in a chapter/track
repeatedly.
1
Press A-B at your chosen start point.
2
Press A-B again at your chosen end point.
➜
The passage will now repeat continuously.
3
To resume normal play, press A-B again. "A TO
B CANCELLED" will be shown on the TV
screen.
Note:
– The REPEAT A-B function can only be set within
the same chapter or track.
Programming favorite tracks
You can play the contents of the disc in the
order you want. At most 99 tracks can be
stored.
1
Load the desired discs on the disc tray.
2
Press the DISC button to playback.
3
While playback is stopped, press PROG/
ANGLE to enter program mode.
➜
"PROG" will blick and "P 00 : 00" is
displayed on the VFD.
4
Use the numeric keys (0-9) to input the track
number in the order you want.
➜
If you attempt to program more than 99
tracks, "FULL" is displayed.
24
5
Press OK to store the track.
●
Repeat steps 4-5 to store other tracks.
6
Press 38 to play the program.
7
To stop playback, press 7 once.
8
To exit the program mode, press 7 again.
Note:
– This function is not available for DVD or MP3/
DIVX/ WMA discs.
Advertisement
Table of Contents
