Step 3: Setting The Tv Set - Philips FWD876/58 User Manual

Preparations
Notes:
– During clock setting, if no button is pressed
within 10 seconds, the system will exit the setting
mode and go back to it's previous status.

Step 3: Setting the TV set

IMPORTANT!
– Make sure you have completed all the
necessary connections.
1
Press DISC on the front panel (or press DISC
on the remote control).
2
Turn on the TV set and set to the correct Video-
In channel. You should see the blue Philips DVD
background screen on the TV set.
➜
You may go to channel 1 on your TV set, then
press the channel down button repeatedly until
you see the Video In channel.
➜
Or, you can use the TV remote control to
select different video modes.
➜
Or, set TV to channel 3 or 4 if you are using
an RF modulator.
Selecting the color system that matches
your TV set
This DVD Mini Hi-Fi System is compatible with
both NTSC and PAL. For the playback of a DVD
disc on this DVD Mini Hi-Fi System, the color
systems of the DVD, TV set and DVD Mini Hi-Fi
System should match.
1
2, 3
4
PROGRESSIVE
SCR SAVER
1
In disc mode, stop playback and press SYSTEM
MENU.
2
Select icon and press 4.
20
PBC
TV SHAPE
AUTO
TV SYSTEM
NTSC
PAL
SET TO MULTI
3
Press 1 / ¡ / 5 / 4 keys on the remote
control to toggle through the functions and
select your preferred option.
➜ and press ¡.
Move to
➜ Move to "TV SYSTEM" and press ¡.
AUTO
– Select this if the connected TV set is
compatible with both NTSC and PAL (multi
system). The output format will be consistent
with the video signal of the disc.
NTSC
– Select this if the connected TV set is NTSC
system. It will change the video signal of a PAL
video disc and output to NTSC system.
PAL
– Select this if the connected TV set is PAL
system. It will change the video signal of an
NTSC disc and output to PAL format.
4
Select an item and press OK.
➜
the screen messages for further setting
confirmation may appear. Follow the on-screen
instructions to proceed to confirm the setting or
not.
To remove the menu
Press SYSTEM MENU.