Component Identification; Terminal Connections - M-system R7D-EC8A Instruction Manual

COMPONENT IDENTIFICATION

Discrete Output Status Indicator LED
■ DISCRETE OUTPUT STATUS INDICATOR LED
LED red indicators show the signal status.
ON : LED ON
OFF : LED OFF
■ OUTPUT TERMINAL ASSIGNMENT
6 7
+24 V Y1
1 2 3
0 V Y0 Y2
NO. ID FUNCTION
1 0V 0V (common)
2 Y0 Output 0
3 Y2 Output 2
4 Y4 Output 4
5 Y6 Output 6

TERMINAL CONNECTIONS

Connect the unit as in the diagram below.
■ EXTERNAL DIMENSIONS unit: mm (inch)
11.5
(.45)
0 1 2 3 4 5 6 7
6 7 8 9 10
1 2 3 4 5
Output Terminals
8 9 10
Y3 Y5 Y7
4 5
Y4 Y6
NO. ID FUNCTION
6 +24V 24V DC
7 Y1 Output 1
8 Y3 Output 3
9 Y5 Output 5
10 Y7 Output 7
65 (2.56)
6 7 8 9 10
1 2 3 4 5
10–M3 SCREW
TERMINALS
for OUTPUT
5-2-55, Minamitsumori, Nishinari-ku, Osaka 557-0063 JAPAN
Phone: +81(6)6659-8201 Fax: +81(6)6659-8510 E-mail: info@m-system.co.jp
CONNECTING THE EXTENSION MODULE
1) Remove the extension connector cover located at the side
of the basic module.
2) Connect the extension module.
3) Mount the combined module on a DIN rail.
17 (.66) 54 (2.13)
6 (.24)
R7D-EC8A
DIN RAIL
35mm wide
30 (1.18) [5 (.20)]
EM-7802-O Rev.3 P. 2 / 6